APM FEM is an add-in that designs and calculates machine elements, mechanisms, and structures, and performs general purpose strength analysis using FEM (finite element method)
APM Structure3D is intended for complex analysis of 3D structures and parts. It can be used for calculations of rods, plates, shells and volumetric solid-state structures, as well as their arbitrary combinations.
APM Graph is intended for performance of the graphical part of the computer-aided preparation of design documents. It is an integral part of the APM WinMachine system, but it can be used independently. APM Graph represents a 2D graphics editor, which can be successfully used to design a graphical part of design documents in different engineering field, science, architecture and construction.
APM Studio is pre-and-post processor for finite element analysis of surface and solid models with STEP file support. It is one of the APM WinMachine basic tools. The module includes built-in finite element mesh generators with different options. It performs static, buckling, modal and heat analysis of parts and assemblies.
APM Joint is a software for the machine element joints calculation and design. It allows to perform a complex calculation and analysis of the most widely used types of joints. The use of this software reduces design time, increases design reliability and efficiency, helps to select the optimal decision.
APM Screw is a comprehensive software for calculation of screw gears. It allows you to perform a complex analysis of the screw gears, compute its main performances, and select the optimum parameters of gear elements.
APM Bear is a state of the art software for the calculation of non-ideal bearing parameters.
APM Shaft let to perform the complete design cycle starting with shaft geometry specifying and finishing with the complete static and dynamic calculation as well as drawing generation.
APM Cam is intended for cam mechanism calculation and design.
Engines are used for providing the motion of the executive mechanism. In most cases the driving gear that transforms the initial rotary movement of the engine into a lower-speed output movement is installed between the engine and the executive mechanism. Single- or multistage drive units combined with belt and chain transmissions are used as executive mechanism. A gearset, as...
Machine elements that have high compliance and minimum dimensions are called elastic elements. They are used as loading devices, as shock absorbers, dissipating energy of the shocks, as devices for the energy accumulation, etc. Elastic elements are of significant importance for the modern machines by increasing longevity of the latter due to the vibration damping and to the resonance...
The mechanical transmissions are the main type of transmission mechanisms used to carry energy (movement) from engines and motors to operating elements of various machines and devices. APM Trans performs designing and calculation, generates working drawings of the mechanical transmissions.
Design with limitations
Working drawings generation
Gear cutting and meshing modeling
Plain bearing is an important type of the rotation supports that is frequently used in complex environments under high vibration and shocks, very low and very high rotational speed, high demands on the shaft stability and accuracy, for the units working in the water and in the aggressive environments, in the absence or lack of the lubrication, etc. The...
APM Mechanical Data
intergation with APM WinMachine modules
The database APM Mechanical Data can be logically divided into two parts – the informational and the graphical. The informational database contains numerical data characterizing qualities of the materials, tolerances and interference, as well as kinematic, energy, geometry and the other parameters needed for the operation of the other APM...